Click image to view full size image
1.Product Features:
1)Original fitting by replacing the shelf of license light or Universal installation
2)Smart size for hidden installation.
3)1/3"Cmos
4) Lens: 170 degrees
5)Waterproof and dust-proof (IP68) CCD camera
6) With car reversing reference line(optional)CCD camera.
7)License light available on partial models.
8)Night vision available and high definition CCD camera.
9)Day /Night sensor for automatic adjustment, minimum illumination auto fill light.
2.Installation Guides:
1)Get out the license light;
2) Get the rear view lens lines across the license light original position;
3)Fasten the camera with the buckle which place in the two sides of the camera;
4)Connect the lens built-in license light power lines to the original license light power lines;
5)Connect the reverse lens switching lines;
6)Connect the camera's signal line to the signal extension line;
7)Connect the car's reverse light line to camera's video cable;
8)Check if all lines are correct connected and arranged;
9)Debug the working effects of the camera and the license light;
10)Cover the car trunk. Finished.
3.Accessories:
1. General wire and power wire
2. User Manual
1)Original fitting by replacing the shelf of license light or Universal installation
2)Smart size for hidden installation.
3)1/3"Cmos
4) Lens: 170 degrees
5)Waterproof and dust-proof (IP68) CCD camera
6) With car reversing reference line(optional)CCD camera.
7)License light available on partial models.
8)Night vision available and high definition CCD camera.
9)Day /Night sensor for automatic adjustment, minimum illumination auto fill light.
2.Installation Guides:
1)Get out the license light;
2) Get the rear view lens lines across the license light original position;
3)Fasten the camera with the buckle which place in the two sides of the camera;
4)Connect the lens built-in license light power lines to the original license light power lines;
5)Connect the reverse lens switching lines;
6)Connect the camera's signal line to the signal extension line;
7)Connect the car's reverse light line to camera's video cable;
8)Check if all lines are correct connected and arranged;
9)Debug the working effects of the camera and the license light;
10)Cover the car trunk. Finished.
3.Accessories:
1. General wire and power wire
2. User Manual
| Technical Parameters: |
| Image Sensor 1/3" CMOS |
| NSTC/TV System NTSC/PAL |
| Sync System internal |
| Minimum illumination < 1 lux |
| White balance Auto |
| IR LEDs No |
| Video color Colorful |
| Waterproof class IP67 |
| Effective pixels 580(H)*540(V) |
| Resolution 420 TV lines |
| Sensing area 3.5964*2.7084mm |
| Video output 1.0Vp-p, 75Ω |
| Electronic shutter 1/60S-1/5000S |
| S/N ratio Better than 48dB |
| Lens angle 170 degree |
| Operation temperature -20° ~+70° |
| Storage temperature -30° ~+80° |
| Warranty 12 months |